I had to re down load lightburn and its like starting over. I had everything dialed in perfectly prior. Now i am getting a skipped spot on everything. My speed is 10. Min power 65. Max 100. Any idea what the issue is?

[Linda (Linda Carter)]

[Rick (Technical Evangelist)]

Hi Linda, the following post is worth review.

Laser Can't cut through big objects but fine in small object

This is an issue with the speed and power setting you have chosen, and how Ruida deals with ramping power for direction changes. Ruida has a ‘Start Speed’ or corner speed which is the point the tube will start to fire and ramp power to the max setting as it accelerates. Below that speed, the laser will use min power and if that is set low, you will not get a beam in the corners. If you want to go slow for cuts, set both min and max the same. I recently provided another response to the same que…

Please let us know how you progress.