Noticed something odd…
$140-$155 seem to be using non-standard values. I think these may be the mode switch values.
When I first connected this machine, find device identified it as GRBL-LPC, but I was advised here to change it to GRBL. I have no idea if a different flavor of GRBL would interpret these values differently, but the machine seems to be operating as expected other than not reporting these non-standard values correctly in Machine Settings and being unable to read or control the mode from lightburn.
Thoughts?
> $$
> $0=10
> $1=25
> $2=0
> $3=7
> $4=0
> $5=0
> $6=0
> $10=1
> $11=0.010
> $12=0.002
> $13=0
> $20=0
> $21=1
> $22=1
> $23=3
> $24=200.000
> $25=2000.000
> $26=250
> $27=4.000
> $30=1000
> $31=0
> $32=1
> $33=0
> $34=10
> $100=100.000
> $101=100.000
> $102=3200.000
> $110=50000.000
> $111=20000.000
> $112=200.000
> $120=4000.000
> $121=1000.000
> $122=100.000
> $130=410.000
> $131=750.000
> $132=40.000
> $140=30000.000
> $141=20000.000
> $142=200.000
> $143=2000.000
> $144=1000.000
> $145=100.000
> $150=6000.000
> $151=6000.000
> $152=200.000
> $153=1000.000
> $154=500.000
> $155=100.000
> ok