I'm new here and need help.

[Oscar.Munoz_12 (Oscar Munoz)]

Hi,
I’m new to this and I’m having some problems. The main one is that when I engrave, the machine stops, but the lightbur continues to run, as if it were working.

I read several forums and they mention something about the cable or communication, but I’ve already checked several USB cables and the problem occurs from one moment to the next.

I don’t see any errors in the command console, it just stops and that’s it.

[Dskall (D Kallenberger)]

Does it only stop on one axis? Or one direction?

[ednisley]

@Oscar.Munoz_12

don’t see any errors in the command console

The Device is configured for GRBL-LPC, but (almost certainly) should be just GRBL.

Going through the Connection Troubleshooting guide may help:

Connection Problems - LightBurn Documentation

[Oscar.Munoz_12 (Oscar Munoz)]

@ednisley

The Device is configured for GRBL-LPC, but (almost certainly) should be just GRBL.

Let me try

[Oscar.Munoz_12 (Oscar Munoz)]

all axes stop