Hi so I am having issues with my engraver… my old board went out and I had to get a replacement… before I was able to run my machine at 2500mm for laser engraving now I have to do it half the speed or I get junk results… see photo… these are the current settings on my engraver… $30 and S-Value are the same. I have a 15000mw laser.
$0=10
$1=25
$2=0
$3=5
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=100.000
$25=1000.000
$26=250
$27=1.000
$30=255
$31=0
$32=1
$100=80.000
$101=80.000
$102=80.000
$110=4000.000
$111=4000.000
$112=6000.000
$120=800.000
$121=800.000
$122=5000.000
$130=400.000
$131=300.000
$132=200.000
