K40, GRBL 1.1 with uno . Stops when rastering


(Richard Winkelman) #1

Ok. I am new to GRBL with the K40. It seems to cut just fine. But when it starts to do a raster it stops . Its likes to resets the job. And somethings it also seems like the program hangs because the job counter will keep going and it will be unresponsive. No error codes either. Here are my current settings.
$0=10

$1=25

$2=0

$3=0

$4=0

$5=0

$6=0

$10=1

$11=0.010

$12=0.002

$13=0

$20=0

$21=0

$22=1

$23=3

$24=100.000

$25=750.000

$26=100

$27=1.000

$30=1000

$31=0

$32=1

$100=160.000

$101=160.000

$102=34.000

$110=10000.000

$111=10000.000

$112=300.000

$120=3000.000

$121=3000.000

$122=10.000

$130=600.000

$131=290.000

$132=300.000

ok $0=10

$1=25

$2=0

$3=0

$4=0

$5=0

$6=0

$10=1

$11=0.010

$12=0.002

$13=0

$20=0

$21=0

$22=1

$23=3

$24=100.000

$25=750.000

$26=100

$27=1.000

$30=1000

$31=0

$32=1

$100=160.000

$101=160.000

$102=34.000

$110=10000.000

$111=10000.000

$112=300.000

$120=3000.000

$121=3000.000

$122=10.000

$130=600.000

$131=290.000

$132=300.000

ok


(Richard Winkelman) #2

I just noticed this. I just tried to raster the same image and this is what the console reported .
Starting stream

Stream completed in 0:15

Grbl 1.1g [’$’ for help]

[MSG:’$H’|’$X’ to unlock]

ok

[MSG:Caution: Unlocked]

ok
The total est time to raster this image was 15 minutes.


(Ray Kholodovsky) #3

What controller do you have?

What version of LightBurn are you running?

A full screenshot of your LightBurn window (no cell phone pics please) may help.


(Richard Winkelman) #4

It ended up being a poor chassis ground that was causing the problem.


(system) closed #5

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.