I’m not sure if this is a software or hardware issue but I’ve been having some issues when using the User origin setting. One of 3 things happen when using this feature. My SOP is to mark my starting location confirm that the origin is centered on the burn. Fire the laser and set that to my mark. I clear origin and set new origin. I will then frame my job. Now here is were things get funky. About 50% of the time things go just fine. 30% of the time it seems to frame just fine but will not return to the origin. Itll be about 1/2 off location. Recently it will frame just fine but when the actual job starts it seems like its going fine but will then jump about 1/2" off location and start burning. Its been super frustrating because its ruined some pretty big projects.