Laser fires with test but doesn’t want to fire

LightBurn Software Questions
1

I have a ray5 with 20w laser and 850mm extension.

I just added a macro for test fire, and the macro works. However now the laser won’t cut designs, it just pretends and doesnt fire the laser. Please help me.

$$

$0=10

$1=25

$2=0

$3=1

$4=0

$5=1

$6=0

$10=1

$11=0.010

$12=0.002

$13=0

$20=1

$21=1

$22=1

$23=3

$24=200.000

$25=2000.000

$26=250.000

$27=3.000

$28=1000.000

$30=1000.000

$31=0.000

$32=0

$38=1

$39=1

$40=100

$41=40

$42=1300

$43=5

$44=0

$45=1

$50=1

$100=80.000

$101=80.000

$102=250.000

$103=100.000

$104=100.000

$105=100.000

$110=6000.000

$111=6000.000

$112=1000.000

$113=1000.000

$114=1000.000

$115=1000.000

$120=500.000

$121=500.000

$122=10.000

$123=200.000

$124=200.000

$125=200.000

$130=850.000

$131=850.000

$132=200.000

$133=300.000

$134=300.000

$135=300.000

2

I think I fixed it, … $32=1 instead of “0”

3

Did it work before you installed the extension kit? Your machine is 850 x 850?

Please post a screenshot of your entire Lightburn screen with your project loaded and the Cuts/Layers Panel and Laser Panel visible. Also post a screenshot of the Settings Window (Gears icon) with the Units and Grids tab visible and post a screenshot of the Device Settings Window (Wrench and Screwdriver icon). https://www.take-a-screenshot.org/

1 Like
4

Tim thank you for the insight and super fast response. Much appreciated, if I run into any other issue, I will use screen shots. BIG OLE’ THANKS TO TIM!