Laser module does not fire

LightBurn Software Questions
1

Hello, the laser module does not fire, the module moves but there is no laser fire. Thanks in advance for your help.

$$

$0=5.0

$1=100

$2=0

$3=0

$4=7

$5=3

$7=0

$10=2047

$11=0.050

$12=0.002

$13=0

$14=0

$15=3

$16=0

$17=4

$18=0

$20=1

$21=1

$22=1

$23=7

$24=1000.0

$25=5000.0

$26=150

$27=3.000

$28=0.100

$29=0.0

$30=1000.000

$31=0.000

$32=1

$33=2000.0

$34=0.0

$35=0.0

$36=100.0

$37=0

$39=1

$40=0

$43=1

$44=3

$45=0

$46=0

$62=0

$63=3

$64=0

$70=27

$73=1

$74=My_SSID

$75=***********

$76=ALA1_AP_9670

$77=12345678

$100=100.000

$101=100.000

$102=100.000

$110=30060.000

$111=30060.000

$112=600.000

$120=2000.000

$121=1800.000

$122=200.000

$130=400.000

$131=400.000

$132=100.000

$160=0.000

$161=0.000

$162=0.000

$180=30060.000

$181=21042.000

$182=600.000

$270=115200

$271=115200

$272=115200

$300=ALA1_STA_9670

$301=1

$302=192.168.5.1

$303=192.168.5.1

$304=255.255.255.0

$305=23

$307=81

$308=21

$310=ALPHA_AP_9670

$312=192.168.5.1

$313=192.168.5.1

$314=255.255.255.0

$332=255

$341=0

$342=30.0

$343=30.0

$344=180.0

$345=200.0

$384=0

$600=0

$601=5

$602=0

$603=5.0

$604=6.0

$605=1

$606=1

$607=0

$608=1

$609=10.000

$610=0

$611=0

$612=1

$613=4294967295

$614=0

$615=firmware.algolaser.com

$616=0

$617=0

$618=0

$622=127

2

If you go to Move window set power to 1% then click Fire button

image
image763×682 20.3 KB

Does the laser fire?
Click Fire button again to turn it off.

3

It didn’t work. The laser light does not turn on either.

4

Try changing $40=1.

5

no, it didn’t work

6

Ok change $40 back to 0.
Recheck all connections to laser if it still doesn´t fire maybe contact Algolaser for further diagnostics.

7

When I set the value to 0, I clicked the fire button and it fired. But when he engraved it stopped firing.

8

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.