Hi everyone,
I just setup my Laser Master 20W and it did a couple o 30 seconds nice cuts/burns and stopped working (with same settings and paper).
I have a blue led working and a weak red one aswell on top of the laser.
I am using a Mac and Lightburn. The machine is connected directly to the Mac with USB.
Here is a photo of my settings, 2 vidéos of the cut with the material at different heights and 2 videos running the “OrturPowerTest.lbrn” file I found on this forum:
Here are my machine settings:
$0=20
$1=50
$2=0
$3=1
$4=0
$5=0
$6=0
$10=1
$11=0.050
$12=0.002
$13=0
$20=1
$21=1
$22=1
$23=7
$24=600.000
$25=3000.000
$26=100
$27=2.000
$30=1000
$31=0
$32=1
$33=250.000
$100=80.000
$101=80.000
$102=80.000
$110=9000.000
$111=9000.000
$112=9000.000
$120=2200.000
$121=1800.000
$122=2500.000
$130=160.000
$131=150.000
$132=1.000
I don’t know what I did wrong and can’t find any help online.
Thank you for your help!
Sébastien