Laser stays On during rapid movement

[Raditech (siddhesh sharad chavan)]

I have an Eleksmaker A3 pro installed. I am facing the issue with laser that stays on between rapid movements. It burns images correctly but problem I face is mainly in texts and shapes drawn in lightburn. I am new to laser engraver. I have 2.5Watt Diode laser. I checked all the wirings and connections. The rapid movements lines are faint but clearly noticeable. Kindly Help me resolve this issue as I am planning to Buy lightburn for my further business expansion.

[LightBurn (Oz)]

Laser not turning off between cuts? (burning during travel moves)

If you have a GRBL device, and your laser is still on when moving between shapes, like this: [image] It most likely means you are using GRBL 1.1f or later, but do not have the controller in Laser Mode. Fix this by typing $32=1 in the Console window and pressing enter If you have a Ruida or other DSP controller and are seeing this happen, it is most likely a dying high-voltage power supply unit (PSU). The drive circuit that turns the laser power off and on tends to go first, before the part …