Hi
I have recently bought a new GRBL 1.1f Controller (CNC 3018) as LightBurn didn’t recognise the controller that cam with the laser.
I am now unable to get the laser to turn on, it will follow the engraving but without the laser on. i have set the option of the enable laser fire button but this won’t even fire the laser.
below is the controller settings
$0=10
$1=25
$2=0
$3=2
$4=0
$5=0
$6=0
$10=0
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=1
$100=800.000
$101=800.000
$102=800.000
$110=600.000
$111=600.000
$112=600.000
$120=30.000
$121=30.000
$122=30.000
$130=200.000
$131=200.000
$132=200.000
Please help as i am slowly giving up with this