Laser wont turn off between movements

Just to let you know I am completely new to using a laser. For some reason I can not get my laser to turn on and off in-between cuts here are my settings
$0=10

$1=25

$2=0

$3=2

$4=0

$5=0

$6=0

$10=1

$11=0.010

$12=0.002

$13=0

$20=0

$21=0

$22=0

$23=0

$24=25.000

$25=500.000

$26=250

$27=1.000

$30=1000

$31=0

$32=1

$100=800.000

$101=800.000

$102=800.000

$110=1000.000

$111=1000.000

$112=600.000

$120=30.000

$121=30.000

$122=30.000

$130=200.000

$131=200.000

$132=200.000

Thank you for the help

Your settings look correct. If you are using the “GRBL” device type in LightBurn, you might have a faulty laser module.

What device did you pick in LightBurn when you set up the laser? (Or did it choose for you automatically?)

It was chosen automatically