Lightburn Camera Focus

[Rick (Technical Evangelist)]

This might be of help:

My camera setup

The cameras are manual focus, and have a small glue dot holding the threads on the lens which you can break by carefully twisting the lens while holding the base of the lens holder (not the board). This may help.

and this:

Camera control For Boss Laser

There should be a very small spot of hot glue on the lens threads, but it is focusable. I held the base of the sensor (not the board) and used enough force to separate it from the glue, and was able to do this without breaking it. It made me nervous though. When you say, “doesn’t obey the controls from the camera box” which ones are you referring to?