I find a lot of posts but no result. Is there still going to be a plasma addition to LB? Or has that been abandoned?

I believe this is a successful case: [image] Update on plasma use case success, albeit post processing gcode LightBurn Software Questions This thread is related to Feature Request: per-cut focus touch off for plasma cutting w/THC I have finally completed my Mill Right Meg…

Yeah, I saw that one. He’s using Sheetcam for the CAM part. There’s another thread where Oz was saying it will be incorporated into LB. Moreso asking about that.

See the last post again from the above reference thread, it has a link to the 100% LB solution. [image] Update on plasma use case success, albeit post processing gcode What follows are artifacts for an alternative 100% LB solution of CAD/CAM for the CNC grbl plasma table process. I only use this…

Again, I saw that. Really just asking when, and if, Lightburn will add it. Doesn’t seem to be any progress so I may just go with Sheetcam and your PP.

I don’t think Lightburn has any plans to add plasma cutters.

And you got this info from who? Again, there’s a long thread with the LB owner saying it would happen.

Only the discussions I have read. I suspect it will be added later to their CNC software, but not in Lightburn.

We do want to add support for Plasma cutters and have been moving in that direction, adding features and internal tooling along the path. These efforts will first be seen with the release of our CNC / Spindle / Router product known as MillMage. We are currently in limited beta with this product. Fol…

Lightburn for Plasma

LightBurn Software Questions

parsec (FerAS) March 10, 2025, 5:11pm 2

I believe this is a successful case: