Marking Gauge made with K40

A small cozy project. Made of (2x) 8mm acrylic, the back plate is engraved crosshatch 1300mm / min with 9% = approx. 3.5 mA and I have cut with 50% = approx. 14mA. Thread is cut freehand with a 4mm thread drill with a cordless drill. Acrylic is a nice and very useful material, a pity that it smells so horrible when processed with a laser.

… all construction work is of course done with LigtBurn, in less than 10 minutes

This is a great idea