My laser does not burn, what should I do?

$$

$0=5.0

$1=100

$2=0

$3=3

$4=7

$5=7

$6=1

$10=2047

$11=0.050

$12=0.002

$13=0

$14=6

$15=0

$16=1

$17=4

$18=0

$19=0

$20=1

$21=1

$22=1

$23=7

$24=600.000

$25=3000.000

$26=100

$27=3.000

$28=0.100

$29=0.0

$30=1000.

$31=0.

$32=1

$33=1000.000

$34=0.000

$35=0.000

$36=100.000

$37=0

$39=1

$40=1

$41=0

$42=1

$43=1

$44=3

$45=0

$46=0

$56=1.000

$57=1800.000

$58=405.000

$59=6000.000

$60=0

$61=0

$62=0

$63=3

$64=1

$65=0

$100=80.000

$101=80.000

$102=2124.000

$110=10200.000

$111=10200.000

$112=600.000

$120=2200.000

$121=1800.000

$122=200.000

$130=390.000

$131=410.000

$132=100.000

$259=0

$260=70

$261=0

$262=150

$263=0

$264=0

$265=50

$266=100

$267=0

$268=0

$269=0

$270=5120

Settings are helpful but only tell us a small part of the story.

Tell us more. Give us pictures.

What is the history of the machine? Is this a new problem? Is it all original? What are you trying to do? What have you tried so far?

What do you mean exactly by it “doesn’t burn”?

1 Like

I recently used it a day ago and it works fine on the family picture I just engraved, but when I use it again after a day, it doesn’t fire even though I changed the fire button into its maximum percentage. It does burn but I need to lower its speed about 500 and lower and I need to increase at its maximum power in order to burn.

It’s the first time it happens, I tried to update its software, restart the laser and lightburn, cleaned it but nothing changed.