Hi, when I hit the “home” button, my Neje Master 2 will to go top left like it should however once I click on “get position” it lists the position as being "x0, y170, z0, u0 so essentially while my laser is physically sitting top left, my laser position indicator shows it sitting bottom left and it causes the laser to not be movable upwards (hits physical limit) or down (thinks it’s already at the bottom of the canvas. My working size is 170mmx170mm.
I tried on my Mac and PC and it happens both places which seems to indicate it’s an issue with the machine’s grbl settings?
? gives me this: ?
<Idle|MPos:0.000,170.000,0.000|FS:0,0>
Idle|MPos:0.000,170.000,0.000|FS:0,0>
ok
$0=10
$1=25
$2=0
$3=1
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=1
$23=3
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=1
$100=80.000
$101=80.000
$102=80.000
$110=4000.000
$111=4000.000
$112=4000.000
$120=200.000
$121=200.000
$122=200.000
$130=170.000
$131=170.000
$132=150.000
Appreciate your help!! Things were working fine, no clue what happened 
Thanks!!