Sorry people, another complete new user to Lightburn. I have been 3D printing for a few years and know what I am doing there. But laser cutting / engraving is all new. I tried the sample file that came with the printer and all is good. I open the lightburn file of the same object and save it as gcod…

You might have not noticed I added a link to the LB documentation about this part to my first answer, they show where you load it (I tried the same things than you before searching the doc…). Just in case, I join my copy of the file, I still have it. I think I have to add the .txt extension to it t…

You need to load the CR-Laser Falcon.lbdev file into LightBurn to get the right settings for this model. You find it on the SD card provided with the laser. [image] Adding and Configuring a Laser - LightBurn Software Documentation Better software for laser cutters. …

[image] PhiLho: .lbdev That’s somewhat of an issue. SD card I got was corrupted, so I had to download the sample files and other files on the card from Creality. Unfortunately they do not have an .lbdev file to download :frowning: I just had a look for it on Gooble but came up empty…?

OK, I now have the lbdev file from a FB group. I was assuming I just load this onto the machine settings, but the option is greyed out in my latest version of the software? [Flacon1]

All good, found it. Just hope this works now :slight_smile:

Wonderful, thank you. It all seems to be working as it should now. Just a case of fine tuning the speed and power settings. :slight_smile:

New user need help

LightBurn Software Questions

_steve (Steve Strickson) December 17, 2023, 4:21pm 5

I also tried in device settings, import, but this wants a different file type?

Config file for creality CR-Falcon 10W