Finally got around to my proper settings for the basic use of the laser. Been playing with the cut/line settings for a while but no matter how much faster or slower, stronger or weaker output I write on my settings, its just not cutting through my 1/8 ply or even paper.
Anyone?
Setup is XCarve 1000x1000
xController
JTech 4.2w
what else would you need to know?
$0=10
$1=25
$2=0
$3=1
$4=0
$5=0
$6=0
$10=0
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=1
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=1
$100=40.000
$101=40.000
$102=188.976
$110=500.000
$111=500.000
$112=500.000
$120=10.000
$121=10.000
$122=10.000
$130=750.000
$131=750.000
$132=200.000
ok