New to laser engraving- have universal engraver 15000, no matter what I set speed at unit traverses image being engraved at same speed, laser power seems to respond to changes in settings. what setting am I missing.
What we’re missing are the device and cut settings you’re using.
Universal engraver 15000
Here are the codes set with my universal engraver 15000. Nothing changes when I change speed settings although it appears laser output changes when I alter that setting.
$0=10
$1=25
$2=0
$3=0
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=1
$100=80.000
$101=80.000
$102=80.000
$110=500.000
$111=500.000
$112=500.000
$120=250.000
$121=250.000
$122=250.000
$130=200.000
$131=200.000
$132=200.000
grbl 1.1
When I image a test image in master engraver speed set at 2000 laser /unit is imaging significantly faster.
Speed doesn’t change no matter what I set lightburn’s speed setting at.
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.