Objects on bed have a glow/halo

LightBurn Hardware Compatibility Cameras
,
1

Recently set up a camera on my machine (OMTech USB1006 with a 20"x40" bed size) and am getting a blue glow on materials i put on the bed. The camera is mounted on the open door to be able to capture the full bed size and comes in mostly clear. I see a slight blue halo in this image from the camera app.

Screenshot 2026-09-11 110111
Screenshot 2026-09-11 1101111137Ă—639 235 KB

Here is the image from the camera utility with the settings:

Screenshot 2026-09-11 110249
Screenshot 2026-09-11 1102491647Ă—972 349 KB

The blue glow/halo is much more pronounced. How can I correct this? Between this and the low resolution, it throws off my alignment some.

2

If you have the same ability as me to manipulate the settings, it’s probably “saturation” that needs to be adjusted / set to 0.

Skærmbillede 2026-09-11 kl. 18.45.39
Skærmbillede 2026-09-11 kl. 18.45.391526×1996 359 KB

3

Alas, I do not have Saturation on my list of options in that panel.

4

Me neither, but my USB camera was $12 so I am not disappointed.

5

Before LightBurn introduced adjustment options for their cameras also for MacOS users, I used an external program/app for it - “Webcam Settings 2.3”. It worked very well. I’m sure there are similar apps for Windows if Windows’ own built-in app for that doesn’t work satisfactorily.
If your image has been ok before and your camera is not broken, then it can also be set back to “normal”.

6

the blue halos in the image look like a dirty lens to me. See if cleaning it helps.