JPT 50 W Fiber Ok here are some pics, as you can see the 2023 one at 50% power doesn’t exist then starts to come back weak. Compare with the 2022 pic when I first got the machine lots of power. I dropped back to LB 1.4.0 to see if that is the problem but it is not. If it was the laser power it I would think it would not come back at all, which makes me think is there something in LB that my system doesn’t like?
Anyway wires all checked, swapped usb ports, its spotless inside, plugged into surge protector and also not plugged in. The only thing I haven’t tried is running the settings in EZcad. I’m sure I missed something. Material 304 Stainless but it happens on all material
