Origin not X0 YO after homing

[hawkesa (Albert Hawkes)]

@berainlb

G10 L2 P1 X-798.996 Y-799.000
$H
?

G10 L2 P1 X-798.996 Y-799.000

$H

?

<Idle|WPos:-798.996,-799.000,-1.000|FS:0,0>

ok

ok

ok

$#

[G54:-798.996,-799.000,0.000]

[G55:0.000,0.000,0.000]

[G56:0.000,0.000,0.000]

[G57:0.000,0.000,0.000]

[G58:0.000,0.000,0.000]

[G59:0.000,0.000,0.000]

[G28:0.000,0.000,0.000]

[G30:0.000,0.000,0.000]

[G92:0.000,0.000,0.000]

[TLO:0.000]

[PRB:0.000,0.000,0.000:0]

ok

$$

$0=10

$1=25

$2=0

$3=0

$4=0

$5=0

$6=0

$10=0

$11=0.010

$12=0.002

$13=0

$20=0

$21=0

$22=1

$23=3

$24=25.000

$25=300.000

$26=250

$27=1.000

$30=255

$31=0

$32=1

$100=100.746

$101=100.421

$102=395.179

$110=8000.000

$111=8000.000

$112=500.000

$120=400.000

$121=400.000

$122=10.000

$130=800.000

$131=800.000

$132=200.000

ok

<Idle|WPos:0.000,0.000,-1.000|FS:0,0|WCO:-798.996,-799.000,0.000>

ok

Everything looks good, i just saved a copy of the current grbl settings and i will attempt to run a job. Thanks Again for your help with this!

[hawkesa (Albert Hawkes)]

I’ve run about six jobs now and paused a few to see if it will lose home position and everything has worked as it should. Thank you for all of your help with this and for your patience with my slow responses over the past two weeks!

[berainlb (PY)]

Glad I was able to help and that it’s working for you.