I did the new LIghtburn update this morning and now I have to manually move the laser back to origin everycut. Anyone have any ideas?

Check ‘Edit → Machine settings-> Miscellaneous’ [Screenshot from 2022-07-15 13-44-52] :smile_cat:

Review this post. I think it may be covering the same issue: [image] Why with 1.2.0 when I push ESC go to absolut ZERO LightBurn Software Questions “Loading my old settings from file” - that’s the part you’re missing. The name of the setting was actually changed, because …

No perspiration. Glad it fixed it. You are the second with the same issue that occurred with an install of 1.2 version. Hoping @LightBurn has an eye open for this, it’s rather odd. Both apparently were not aware of the ‘return position’ setting, so I doubt you changed it. Wonder what’s similar …

I had the same problem. Thanks for posting this as it fixed my issue! :grinning:

[image] jkwilborn: Hoping @LightBurn has an eye open for this, it’s rather odd. @LightBurn explains it in the link that I included. Essentially Origin and Absolute Origin had been previously erroneously swapped in their usage. The fix to that is causing isolated regression cases.

Sorry, didn’t read the details the link… :smile_cat:

It was a blink and you miss it type of thing. As per @Lightburn ’s typical high-density signal to noise ratio communication style.

Origin restart not working after update to Lightburn

LightBurn Software Questions

berainlb (PY) July 21, 2022, 4:54pm 2

Review this post. I think it may be covering the same issue: