Ortur Laser Master 3, setup from YRR to Y Motor

LightBurn Hardware Compatibility
, , , ,
1

Could someone please help with getting my setting corrected, I had switched it to use the rotary and now I am having issues getting the setting back for Y Motor.

Screen Shot 2024-07-23 at 4.49.54 PM

Below are the current settings:

Waiting for connection…

Waiting for connection…

[MSG:25:Info: USB SERIAL STREAM CONNECTED]

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM_ESP_PRO_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

ok

[ORIGIN:China]

[PRODUCER:ORTUR]

[AUTHOR:LEADIFFER]

[MODEL:Ortur Laser Master 3]

[OLF:211]

[OLH:OLM_ESP_PRO_V2.4B]

[OLM:GENERAL]

[DATE:20230417]

[SN:05592001F4C56EF73FFA4B42E740F908]

[VER:1.1f.20220325:]

[OPT:VNZHTS+,63,32767,3,0]

Target buffer size found

[NEWOPT:ENUMS,RT+,HOME,NOPROBE,TC,SED,UD,CLU,WIFI,FTP,TMC=7,SD,ITG,GT,YRR]

[FIRMWARE:grblHAL]

[NVS STORAGE:*FLASH]

[DRIVER:ESP32-S2]

[DRIVER VERSION:220327]

[DRIVER OPTIONS:GIT-NOTFOUND]

[BOARD:Ortur Laser Master 3]

[TYPE:OLM3]

[CLUSTER:16]

Cluster size found

[WIFI MAC:70:04:1D:FB:52:D6]

[IP:192.168.1.105]

[PLUGIN:Power Detecter v1.0]

[PLUGIN:Power Control v1.0]

[PLUGIN:gyroscope sensor v1.0]

[PLUGIN:Trinamic v0.09]

[PLUGIN:SDCARD v1.05]

[PLUGIN:ITG STREAM v1.00]

[PLUGIN:ESP32 WebUI v0.03]

[PLUGIN:GADGET v1.00]

[PLUGIN:YRR v1.00]

ok

$0=5.0

$1=100

$2=0

$3=1

$4=7

$5=0

$7=0

$10=2047

$11=0.050

$12=0.002

$13=0

$14=0

$15=3

$16=1

$17=4

$18=0

$20=1

$21=0

$22=1

$23=7

$24=600.0

$25=800.0

$26=100

$27=1.000

$28=0.100

$29=0.0

$30=1000.000

$31=0.000

$32=1

$33=2000.0

$34=0.0

$35=0.0

$36=100.0

$37=0

$39=1

$40=0

$41=0

$42=1

$43=1

$44=3

$45=0

$46=0

$56=1.0

$57=1800.0

$58=395.0

$59=6000.0

$60=0

$61=1

$62=0

$63=3

$64=0

$70=31

$73=3

$74=Testing123

$75=**********

$76=OLM3_AP_52D6

$77=12345678

$100=100.000

$101=100.000

$102=100.000

$110=20040.000

$111=20040.000

$112=600.000

$120=2000.000

$121=1800.000

$122=200.000

$130=400.000

$131=400.000

$132=100.000

$140=600

$141=1000

$142=800

$150=16

$151=16

$152=16

$160=0.000

$161=0.000

$162=0.000

$180=20040.000

$181=14028.000

$182=600.000

$200=65.0

$201=50.0

$202=60.0

$210=100

$211=100

$212=100

$220=50.0

$221=60.0

$222=60.0

$270=115200

$271=115200

$272=115200

$300=OLM3_STA_52D6

$301=1

$302=192.168.5.1

$303=192.168.5.1

$304=255.255.255.0

$305=23

$306=80

$307=81

$308=21

$310=OLM3_AP_52D6

$312=192.168.5.1

$313=192.168.5.1

$314=255.255.255.0

$330=admin

$331=user

$332=255

$339=3

$341=0

$342=30.0

$343=30.0

$344=180.0

$345=200.0

$384=0

$392=5.0

$393=3.0

$600=0

$601=5

$602=0

$603=5.0

$604=6.0

$605=1

$606=1

$607=0

$608=1

$609=1.000

$610=0

$611=0

$612=1

$613=42530

$614=0

$615=api.ortur.cn

$616=0

$617=0

$622=127

ok

$0=5.0

$1=100

$2=0

$3=1

$4=7

$5=0

$7=0

$10=2047

$11=0.050

$12=0.002

$13=0

$14=0

$15=3

$16=1

$17=4

$18=0

$20=1

$21=0

$22=1

$23=7

$24=600.0

$25=800.0

$26=100

$27=1.000

$28=0.100

$29=0.0

$30=1000.000

$31=0.000

$32=1

$33=2000.0

$34=0.0

$35=0.0

$36=100.0

$37=0

$39=1

$40=0

$41=0

$42=1

$43=1

$44=3

$45=0

$46=0

$56=1.0

$57=1800.0

$58=395.0

$59=6000.0

$60=0

$61=1

$62=0

$63=3

$64=0

$70=31

$73=3

$74=Testing123

$75=**********

$76=OLM3_AP_52D6

$77=12345678

$100=100.000

$101=100.000

$102=100.000

$110=20040.000

$111=20040.000

$112=600.000

$120=2000.000

$121=1800.000

$122=200.000

$130=400.000

$131=400.000

$132=100.000

$140=600

$141=1000

$142=800

$150=16

$151=16

$152=16

$160=0.000

$161=0.000

$162=0.000

$180=20040.000

$181=14028.000

$182=600.000

$200=65.0

$201=50.0

$202=60.0

$210=100

$211=100

$212=100

$220=50.0

$221=60.0

$222=60.0

$270=115200

$271=115200

$272=115200

$300=OLM3_STA_52D6

$301=1

$302=192.168.5.1

$303=192.168.5.1

$304=255.255.255.0

$305=23

$306=80

$307=81

$308=21

$310=OLM3_AP_52D6

$312=192.168.5.1

$313=192.168.5.1

$314=255.255.255.0

$330=admin

$331=user

$332=255

$339=3

$341=0

$342=30.0

$343=30.0

$344=180.0

$345=200.0

$384=0

$392=5.0

$393=3.0

$600=0

$601=5

$602=0

$603=5.0

$604=6.0

$605=1

$606=1

$607=0

$608=1

$609=1.000

$610=0

$611=0

$612=1

$613=42530

$614=0

$615=api.ortur.cn

$616=0

$617=0

$622=127

ok

$0=5.0

$1=100

$2=0

$3=1

$4=7

$5=0

$7=0

$10=2047

$11=0.050

$12=0.002

$13=0

$14=0

$15=3

$16=1

$17=4

$18=0

$20=1

$21=0

$22=1

$23=7

$24=600.0

$25=800.0

$26=100

$27=1.000

$28=0.100

$29=0.0

$30=1000.000

$31=0.000

$32=1

$33=2000.0

$34=0.0

$35=0.0

$36=100.0

$37=0

$39=1

$40=0

$41=0

$42=1

$43=1

$44=3

$45=0

$46=0

$56=1.0

$57=1800.0

$58=395.0

$59=6000.0

$60=0

$61=1

$62=0

$63=3

$64=0

$70=31

$73=3

$74=Testing123

$75=**********

$76=OLM3_AP_52D6

$77=12345678

$100=100.000

$101=100.000

$102=100.000

$110=20040.000

$111=20040.000

$112=600.000

$120=2000.000

$121=1800.000

$122=200.000

$130=400.000

$131=400.000

$132=100.000

$140=600

$141=1000

$142=800

$150=16

$151=16

$152=16

$160=0.000

$161=0.000

$162=0.000

$180=20040.000

$181=14028.000

$182=600.000

$200=65.0

$201=50.0

$202=60.0

$210=100

$211=100

$212=100

$220=50.0

$221=60.0

$222=60.0

$270=115200

$271=115200

$272=115200

$300=OLM3_STA_52D6

$301=1

$302=192.168.5.1

$303=192.168.5.1

$304=255.255.255.0

$305=23

$306=80

$307=81

$308=21

$310=OLM3_AP_52D6

$312=192.168.5.1

$313=192.168.5.1

$314=255.255.255.0

$330=admin

$331=user

$332=255

$339=3

$341=0

$342=30.0

$343=30.0

$344=180.0

$345=200.0

$384=0

$392=5.0

$393=3.0

$600=0

$601=5

$602=0

$603=5.0

$604=6.0

$605=1

$606=1

$607=0

$608=1

$609=1.000

$610=0

$611=0

$612=1

$613=42530

$614=0

$615=api.ortur.cn

$616=0

$617=0

$622=127

ok

<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25164,5|Ov:100,100,100|A:SFM|H:1,7>

<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:25157,7|A:SFM>

ok

Project loaded in 4 milliseconds

Project file saved as Bookmark Lover with flowers.

Project loaded in 1 milliseconds

Project loaded in 1 milliseconds

Project loaded in 12 milliseconds

<Idle|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25192,5|H:1,7>

ok

Starting stream

Stream completed in 0:13

ALARM:3

Reset while in motion. Grbl cannot guarantee position. Lost steps are likely. Re-homing is highly recommended.

ok

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM_ESP_PRO_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

[MSG:‘$H’|‘$X’ to unlock]

error:9

G-code locked out during alarm or jog state.

[MSG:3:Warning: Caution: Unlocked]

ok

<Home|MPos:229.930,1966.190,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25018,192|Ov:100,100,100|A:SFM>

<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:25150,119|A:SFM>

<Home|MPos:-39.950,-39.950,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

<Home|MPos:-79.960,-79.960,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

<Home|MPos:-119.980,-119.980,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

<Home|MPos:-159.990,-159.990,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

<Home|MPos:-200.000,-200.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

<Home|MPos:-240.010,-240.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

<Home|MPos:-280.010,-280.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

<Home|MPos:-320.010,-320.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

<Home|MPos:-360.000,-360.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>

ok

$$

$0=5.0

$1=100

$2=0

$3=1

$4=7

$5=0

$7=0

$10=2047

$11=0.050

$12=0.002

$13=0

$14=0

$15=3

$16=1

$17=4

$18=0

$20=1

$21=0

$22=1

$23=7

$24=600.0

$25=800.0

$26=100

$27=1.000

$28=0.100

$29=0.0

$30=1000.000

$31=0.000

$32=1

$33=2000.0

$34=0.0

$35=0.0

$36=100.0

$37=0

$39=1

$40=0

$41=0

$42=1

$43=1

$44=3

$45=0

$46=0

$56=1.0

$57=1800.0

$58=395.0

$59=6000.0

$60=0

$61=1

$62=0

$63=3

$64=0

$70=31

$73=3

$74=Testing123

$75=**********

$76=OLM3_AP_52D6

$77=12345678

$100=100.000

$101=100.000

$102=100.000

$110=20040.000

$111=20040.000

$112=600.000

$120=2000.000

$121=1800.000

$122=200.000

$130=400.000

$131=400.000

$132=100.000

$140=600

$141=1000

$142=800

$150=16

$151=16

$152=16

$160=0.000

$161=0.000

$162=0.000

$180=20040.000

$181=14028.000

$182=600.000

$200=65.0

$201=50.0

$202=60.0

$210=100

$211=100

$212=100

$220=50.0

$221=60.0

$222=60.0

$270=115200

$271=115200

$272=115200

$300=OLM3_STA_52D6

$301=1

$302=192.168.5.1

$303=192.168.5.1

$304=255.255.255.0

$305=23

$306=80

$307=81

$308=21

$310=OLM3_AP_52D6

$312=192.168.5.1

$313=192.168.5.1

$314=255.255.255.0

$330=admin

$331=user

$332=255

$339=3

$341=0

$342=30.0

$343=30.0

$344=180.0

$345=200.0

$384=0

$392=5.0

$393=3.0

$600=0

$601=5

$602=0

$603=5.0

$604=6.0

$605=1

$606=1

$607=0

$608=1

$609=1.000

$610=0

$611=0

$612=1

$613=42539

$614=0

$615=api.ortur.cn

$616=0

$617=0

$622=127

ok

2

If your laser has a switch YRR/Y under the frame did you switch it back to Y?

3

Correct, I switched it back and still not framing correctly.

4

Did you change any GRBL parameters? If so, did you record the old values before changing them?

Is the rotary enabled in the Laser Setup or Laser window?

5

I do not recall which two parameters I did change, but I had saved a backup of original parameters but still having issues when i reinstall them.
i also turned off laser enabled on both.

6

How did you reinstall them? What procedure did you use?

7

I went ahead and had my machine connected and under the Edit I went into machine settings and selected Load from file. I selected the file I had saved before changing my settings.

8

I figuered out I was imporpery loading file. thank you all for support

1 Like
9

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.