Power max above 25% causing jerky movements

I just changed lasers and have been having issues with Power Max settings above 20%

At 20% a circle burns nicely, but if I bring it up to 25% the carriage jerks and stops about once per second. Here is a video of what it is doing: https://youtu.be/1tEe-9IGFpc

Here are the results:

Here are my machine settings:

Grbl 1.1h [’$’ for help]
$0=10
$1=25
$2=0
$3=0
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=255
$31=0
$32=1
$100=80.000
$101=80.000
$102=80.000
$110=5000.000
$111=5000.000
$112=5000.000
$120=2000.000
$121=2000.000
$122=200.000
$130=5000.000
$131=5000.000
$132=5000.000
ok

Am I missing something obvious?

I still have not figured out what on earth is causing this unusual behaviour. The gcode for both is identical, except the power.

I’m far from an expert, but does your $30=255 match the S value in the devise settings screen?

Edit.
I just re-read your last post.
The power settings has to be set the same.