Please,help
For a few dazs mz Ikier laser wont homing at all.
When it comes to “home”,it start buzzing for 30 second.
When i click on the move panel,and click “get position”,it comes on both axis down to -615.
This is the error.
Please,i am new to lightburn,especially in laser settings.
I try everything
Thank you so much.
ALARM:1
Hard limit triggered. Machine position is likely lost due to sudden and immediate halt. Re-homing is highly recommended.
[MSG:alarmCodeCodeIntHandle:1
]
Grbl AAS11A0057-AB-V1.02 [‘$’ for help]
[MSG:‘$H’|‘$X’ to unlock]
[MSG:Caution: Unlocked]
ok
[MSG:PreviousPage:1
]
Grbl AAS11A0057-AB-V1.02 [‘$’ for help]
$0=1
$1=25
$2=0
$3=0
$4=0
$5=1
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=3
$24=300.000
$25=3000.000
$26=500.000
$27=4.000
$30=1000.000
$31=50.000
$32=1
$100=80.000
$101=80.000
$102=1600.000
$103=100.000
$104=100.000
$105=100.000
$110=50000.000
$111=20000.000
$112=1000.000
$113=1000.000
$114=1000.000
$115=1000.000
$120=4000.000
$121=1000.000
$122=500.000
$123=200.000
$124=200.000
$125=200.000
$130=410.000
$131=380.000
$132=60.000
$133=300.000
$134=300.000
$135=300.000
ok