Rotary setup Falcon A1 Pro

[parsec (FerAS)]

Do you connect the rotary to the Y port or does the Falcon have a dedicated port for the rotary?

Just checked

Falcon A1/A1 pro Rotating Kit User Guide

and you have a rotary port connected to A.

So you have to keep the A letter and as a sanity check Save the GCode and open the file with a text editor or post here for us to check the code.

Or this also worth a try:

Rotary Pro Set Up

I have the base model, Falcon A1 10w. It’s working fine now, don’t fully understand how and why. I initially tried all axis settings without success, but now with Rotary set to Z axis and 360mm per rotation it’s all good, can’t think of anything else I did, that may have helped.