I recently updated LB to latest build and homed my machine. When I jog Left, the machine goes right, when I jog right, the machine goes right. When I jog down, the machine goes up, when I jog up…the machine goes up. I can maneuver the the machine to exact place on workspace while using the button on side that looks like a map indicator.
I uninstalled the updated version and went back to 1.7… everything runs smooth as desired.
My current settings are as follows, but I’m not seeing where the reversing of down and left could be affected. Not a GRBL guru by any means, but something is definitely wrong. I’m on Win 10, usinig ProVer XL machine with Laser tree K20
$$
$0=10
$1=25
$2=0
$3=0
$4=0
$5=0
$6=0
$10=0
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=1
$23=0
$24=25.000
$25=500.000
$26=250
$27=6.000
$30=10000
$31=20
$32=1
$100=161.666
$101=160.000
$102=160.000
$110=2000.000
$111=2000.000
$112=2000.000
$120=300.000
$121=300.000
$122=300.000
$130=620.000
$131=620.000
$132=110.000