Hello! I use a translator, so please forgive my English
The IKier K1 Pro 24w laser used to work correctly, but now it starts cutting and stops, and the head returns home. When I try again, it stops at the same place and returns home again.
It gives an error
ALARM:3
Reset during movement. Grbl cannot guarantee position. Possible lost steps. Re-aiming is highly recommended.
At or near line 0:
Grbl 1.1h [‘$’ for help]
[MSG:‘$H’|‘$X’ to unlock]
ok
Grbl 1.1h [‘$’ for help]
ok
[VER:1.1h.20230501:]
[OPT:VNZHDL+I,254,2048]
Target buffer size found
ok
Waiting for connection…
Port failed to open - already in use?
Waiting for connection…
ok
[VER:1.1h.20230501:]
[OPT:VNZHDL+I,254,2048]
Target buffer size found
ok
$0=10
$1=25
$2=0
$3=7
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=3
$24=200.000
$25=2000.000
$26=250
$27=4.000
$30=1000
$31=0
$32=1
$33=0
$34=10
$35=1
$100=100.000
$101=100.000
$102=1600.000
$110=50000.000
$111=20000.000
$112=1000.000
$120=4000.000
$121=1000.000
$122=500.000
$130=410.000
$131=410.000
$132=120.000
$140=30000.000
$141=20000.000
$142=1000.000
$143=2000.000
$144=1000.000
$145=500.000
$150=6000.000
$151=6000.000
$152=1000.000
$153=1000.000
$154=500.000
$155=500.000