Traversal lines still on and text in miror on woodite

[bobigoca (Bobi)]

Machine is CNC 3018 pro with Cronos newest board, laser 15w fixed diode.
In latest draw, traversal lines still on althow they are off and text in mirror, soo have to mirored agin
to look as i has to be on screen

[Rick (Technical Evangelist)]

I notice you have the machine origin set to back-left. Is this where your system homes when powered on? Most GRBL systems default to home to front-left. Do you have limit switches on this system?

For the traversal lines being cut - Check your setting for $30 and $32 in the console by typing $$ and pressing enter.

$32 should be 1 (enable laser mode)

$30 should be 1000

The $30 value can be set either in your firmware to match LightBurn, or in the LightBurn device settings (S Max) to match your GRBL setting.

[bobigoca (Bobi)]

$$
$0=10
$1=25
$2=0
$3=6
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=3
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=255
$31=0
$32=1
$100=800.000
$101=800.000
$102=800.000
$110=5000.000
$111=5000.000
$112=800.000
$120=20.000
$121=20.000
$122=20.000
$130=300.000
$131=300.000
$132=125.000

When powered on, my machine stays on place.dont move, this is without connection any software

[bobigoca (Bobi)]

Try everything, Traversal lines still remains