Trying to better understand the min / max power for use with material library

[Rick (Technical Evangelist)]

I think this is what @Stroonzo is wanting to show:

@LightBurn

With Min & Max set to 10 / 85, the delta between them is 75%, so that’s what you’re scaling. If you had 11 squares, with the scales of 0, 10, 20, 30, and up to 100, the equivalent Max Power values would be:

Scale	Output	Math
0%	10.0	10 + (0.0 * 75)
10%	17.5	10 + (0.1 * 75)
20%	25.0	10 + (0.2 * 75)
30%	32.5	10 + (0.3 * 75)
40%	40.0	10 + (0.4 * 75)
50%	47.5	10 + (0.5 * 75)
60%	55.0	10 + (0.6 * 75)
70%	62.5	10 + (0.7 * 75)
80%	70.0	10 + (0.8 * 75)
90%	77.5	10 + (0.9 * 75)
100%	85.0	10 + (1.0 * 75)