Using jteck laser with lightburn attached to a elite onefinity cnc

LightBurn Software Questions
1

I bought the laser last and used it with lightburn no problems but I used files I bought on Etsy. I hooked it up again to use but this time I was making the file, all I was trying to do is a 5x5" fill to try to darken a 3d carving I had made. I saved it and I tried to load in in the Masso but it wouldn’t recognize it so I did some research and realized I didn’t save the

Screenshot 2026-09-07 at 7.21.58 PM
Screenshot 2026-09-07 at 7.21.58 PM246×152 7.4 KB

gcode so I did and the same result. To use a file in Masso it has to be saved as .nc.

Any help would be a appreciated!

Cheer Mark

2

When saving the GCode you can change the extension.

Also check for a Masso flavor.

3

Hi Parsec thanks for the help, I just figured it out, I figured it would be something simple.

Cheers Mark

4

How do I post that I solved the problem?

5

Mark your above answer as solution.

6

Great Thanks

7

Can you clue us in on the ‘fix’?

:grinning_cat: