Goodmorning everyone.
I would need to move the work area to better position the materials.
Coincidentally I had succeeded (as seen in the photo / green arrows)), but although I did many tests, I was no longer successful and it always starts too close to the car (photo / red arrows).
Furthermore, the position of the Home seems strange …(white arrows)
Does anyone know how to do?
(Ortur Laser Master 1 / firmware 1.34 / gbrl 1.1 f)
Console Exit:
ok
$
[HLP: $$ $ # $ G $ I $ N $ x = val $ Nx = line $ J = line $ SLP $ C $ X $ H ~! ? ctrl-x]
ok
$$
$ 0 = 20
$ 1 = 50
$ 2 = 0
$ 3 = 1
$ 4 = 0
$ 5 = 0
$ 6 = 0
$ 10 = 1
$ 11 = 0.050
$ 12 = 0.002
$ 13 = 0
$ 20 = 1
$ 21 = 1
$ 22 = 1
$ 23 = 7
$ 24 = 600,000
$ 25 = 3000.000
$ 26 = 100
$ 27 = 2,000
$ 30 = 1000
$ 31 = 0
$ 32 = 1
$ 33 = 250,000
$ 100 = 80,000
$ 101 = 80,000
$ 102 = 80,000
$ 110 = 9000.000
$ 111 = 9000.000
$ 112 = 9000.000
$ 120 = 2200.000
$ 121 = 1800,000
$ 122 = 2500.000
$ 130 = 160,000
$ 131 = 150,000
$ 132 = 1.000
ok
Thanks in advance.
Maurizio