xTool S1 Firmware Downgrade / Rollback (need previous firmware files)

[westsdad (Scott)]

Thanks!

The problem is that the xTool config profile (using layer bypass) is LightBurn’s setup using the following (that is not working):

Setting up xTool S1 with new xTool device type in LB 1.7 and Beyond

This device type does not support the xTool F1 or P2. It does not support ANY network device at this time You can download LightBurn from here: Download / Trial – LightBurn Software In LightBurn 1.7.00, we have added native support for xTool Devices that use serial communication like the D1, D1 Pro, and S1. This bypasses their GRBL compatibility layer and has resolved some of the issues we have seen with these machines like making triangles when rectangles are expected, and moves some function…

While the GRBL config profile is xTool’s setup using the following (that is working):

https://support.xtool.com/article/1036?from=xTool+S1&url=/product/24&ref=rVAr7a1K