setting up Xtools1, “detect”, “focus”, etc. are not in the “console” tab. unable to test these functions at all. ???

Follow the instructions in this post to add your S1 to LightBurn: [image] Setting up xTool S1 with new xTool device type in LB 1.7 and Beyond xTool This device type does not support the xTool F1 or P2. It does not support ANY network device at this time You can download …

Thank you for the quick response and info. I followed your instructions to the “T”, but still no luck. in an attempt to run the focus test the machine made a noise as if it were doing something, and received an “OK” on the console. I clicked “Home Z” and got the same sound of activation with this; …

Hello, Make sure your probe is reset. Go itn XCS, and make sure you do not have to reset the probe. Lightburn will not tell you that the probe has an error and needs needs to be reset. I learned this over time. Brian

@gunnyb I don’t have an S1 to test it on my end. Please try Brian’s suggestion about resetting the probe in XCS. Can you send us a screenshot of the whole LightBurn window showing the job you want to frame / run? If you can export your added device and send us the .LBZIP file, I’d like to review…

XtoolS1 lightburn configuration

LightBurn Hardware Compatibility xTool

Aaron.F (Aaron) September 19, 2025, 12:19pm 2

Follow the instructions in this post to add your S1 to LightBurn: