20W XTool Tumbler Settings

I found this old thread and was wondering if anyone has speed and power setting suggestions for the 20W Xtool Diode laser? I wanted to try a tumbler with my D1 pro and RA2 rotary.

Old Thread - Tumbler setting for xtool d1

Just looking for a starting point.

Cheers,
RBO

I saw a guy with the 10W version have good success with 100% power and 70 mm/s. I’m not sure what the “factor” is to step down power from the 20w to 10w.

I was thinking of trying 80% power at 70 mm/s