Burn a point indidual

[berainlb (PY)]

I made an attempt at simulating dot mode on g-code machines to see if I could get some benefit from it. TLDR is that it didn’t seem to provide any value with my setup and with the types of operations I was trying to do with the material I was using.

G-code "Dot" mode proof-of-concept

This is a follow-up to a discussion occurring in a separate topic around Ruida’s Dot mode and how that might be used to get a different type of cutting effect. The question was if this technique could be used to attain a similar effect using diode lasers and g-code. I’ve done an inital proof-of-concept demonstrating the necessary code and the mechanics involved in doing this. What’s left is to test this with additional materials and settings to see if this provides any real world advantages. I…