Engraving on brass?

[jkwilborn (Jack Wilborn)]

Here is a link

New tile engraving method

I have over the last few months been trying the Norton Tile engraving method and many others that I have seen on YouTube. To date I have not been able to get very good results. So not being one to give up I started experimenting and after many attempts have finally got to doing it this way. It’s also a very cheap method and totally safe. First I mix 100ml of PVA wood glue to 300ml of water. Add 3 heaped teaspoons of titanium dioxide and mix well. I then transfer this solution to a spray bottle.…

Acrylic mix with TiO2…

BikeMike's White Tile Method

I revised my mix at the start of this thread. Pour 100ml of white acrylic craft paint, (cheap at any dollar store or walmart) into a container after mixing very well. Non toxic and cleans up very easy with water Then in another container put in 25ml water Now mix in 2 1/4 teaspoons (us) titanium dioxide and mix very well. While stirring the paint, slowly add the water and TI02 mix. after that I used a 3D printed mini paint mixer from thingiverse to mix very well. I use a 1.5 inch foam brus…

Both are kind of long…

Sorry about the weather there