Keine Wlan verbindung zum xTool S1

[parsec (FerAS)]

I believe that you can´t connect via WIFI…
Check here:

Setting up xTool S1 with new xTool device type in LB 1.7 Beta

This device type does not support the xTool F1 or P2. It does not support ANY network device at this time You can download LightBurn from here: Download / Trial – LightBurn Software In LightBurn 1.7.00, we have added native support for xTool Devices that use serial communication like the D1, D1 Pro, and S1. This bypasses their GRBL compatibility layer and has resolved some of the issues we have seen with these machines like making triangles when rectangles are expected, and moves some function…

Feeling like a broken record.. XTool S1 40W

LightBurn created a new protocol called XTOOL. After adding the S1 laser device using the file from xTool instructions - Operate xTool S1 with LightBurn - xTool Support Center - you need to double click the laser and change the protocol to XTOOL. This should fix the issue shown in the photo [LigthtBurn] This is how it should look like at the end [xTool Creative Space]