Laser does not work but home and origin works

[JohnJohn (John Johnson)]

Regrettably, I don’t have this device.

@gilaraujo - nothing wrong with your memory. You are correct. Adam is Point on this one.

Snapmaker Artisan not working with Snapmaker profile

Hi all. I’ve reached out to Snapmaker for comment. The Artisan used to work with the default Marlin profiles. But they seem to be switching everything over to GRBL. Unfortunately the did not inform us of this. @berainlb is right - use the provided lbdev profiles and it should work (I checked and they are GRBL based… so I don’t know what that means for older Artisan devices). But he is also right that rotary will not work. There is special logic written specifically for Snapmaker devices and cu…

Snapmaker Rotary Axis - Any comments from the LB developers?

Do you mean the Version 1.4.02 and it came in the final of the 1.4.03??? I tested the official v1.4.03, same bug… The Y-Axis moves by exactly the value set under diameter. If i press the test button in the rotary settings, this happend [Snapmaker Rotary error]

@PeteD2945

Updated lightburn and firmware and now it no longer works.

Regrettably, this is expected with their most recent firmware change.
If you roll the Snapmaker firmware back from the most recent to the one immediately before, you may be in fairly good shape.