Help required. Been using my sculpfun s10 for 9 months now, all was fine. Packed it away for 2 months and got it back out today. I set of a design engraving a pattern in to 5mm plywood, then cutting the shapeout. The engraving worked as expected but when it changed to cut, the laster didn’t follow t…

[image] Smithy39: All was fine before I packed it up I’m probably even mistaken, but did you check all the connections?

Hi, yea checked all the connections, and it runs perfectly when engraving. It seems to happen more when the laser is on high power and cutting a line

[image] Smithy39: It seems to happen more when the laser is on high power and cutting a line As you describe it sounds like a lack of power. But it’s still pretty weird…

[image] Smithy39: started making small squiggle/ random cuts Without pictures it’s hard to tell, but if the result is similar to these: [image] Problem Engrawing on lines LightBurn Software Questions hello. i have a problem. my laser isn`t cutting on the lines he s…

Laser engraving but crashes when cutting

LightBurn Software Questions

ednisley (Ed Nisley) July 25, 2023, 4:17pm 5

Without pictures it’s hard to tell, but if the result is similar to these:

Then it might be a licensing issue.