I’m trying to connect a new Ortur LM3 to a Mac Air M1 running Sonoma 14 via USB. The scan does not find the device and the manual connection also does not work. In the connection pull down all I get is “cu.wlan-debug”, no USB option. I’ve tried several cables and both ports on the mac with no result…

Try this on the dropdown list when manually adding the device, look for this in the drop down list: cu.usbmodem497F3547 May be the last item in the list.

Sometimes I have the cu.usbmodem497… option but usually the only option in the pull down is cu.wlan-debug. I can’t find any explanation as to why that’s there. I got the usb working for an hour or so and then configured the wifi connection. That worked for a few hours and then that stopped and wont …

Have you checked Ortur’s website to see if there is a firmware update?

try this thread [image] Mac Book Pro USB port/com issues LightBurn Software Questions I know this has been brought up in a few different ways over the last few years but I have yet to find a resolution posted. I have a 2022 MBP and I cannot get the Ortur LM3 to work with t…

I’ve recently started with a falcon on my macbook and had the same initial connection issue. I had a cheap usbc hub thats a brick and yep, fixed. In the hope of getting a more civilised connection I went a bought apples usbc to usba short adaptor and gave it a try with the same cord, but it failed. …

Mac OS no USB connection cu.wlan-debug

LightBurn Software Questions OS Specific

gilaraujo (Gil Araújo) January 11, 2024, 3:08pm 5

try this thread