Neje Master Laser coordinate issue after homing

Hi!

I am one of those who struggle with the Neje Master Laser. But I have got most things to work but I have an issue with the coordinate system. After homing the machine(this works as of the latest firmware upgrade) it thinks that that it’s positioned at X:0 Y:170 instead of X:0 Y:0. I believe that I have configured the machine correctly, but please have a look and let me know if I have entered anything wrong.

Running command “?” after reboot:
<Idle|MPos:0.000,0.000,0.000|Bf:15,127|FS:0,0|WCO:0.000,170.000,0.000>

Running command “?” after homeing sequence:
<Idle|MPos:0.000,170.000,0.000|Bf:15,127|FS:0,0|Ov:100,100,100>

If I click Get Position after homing

My home position settings

GrblSettings

$$
$0=10
$1=25
$2=4
$3=5
$4=0
$5=0
$6=0
$10=3
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=15
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=255
$31=0
$32=0
$100=80.000
$101=80.000
$102=80.000
$110=5000.000
$111=5000.000
$112=5000.000
$120=800.000
$121=800.000
$122=5000.000
$130=170.000
$131=170.000
$132=500.000
ok

111

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.