Pause issue mid project

[LightBurn (Oz)]

Try this - it has worked for others, and might solve your issues as well:

Laser keeps disconnecting on larger jobs

Problem solved !! Thanks to Ortur Support who did really great. My problem was due to my grounding, which was not properly done. Static electricity bursts from the X belt’s movements was causing the disconnections/error:8. We attached a copper wire on one of the 4 screws of the laser module’s top plate. Wire then connects to a X-axis’ gantry screw. From that screw, another wire goes and connects to the Y-axis’ gantry screw. Wires go through cable looms to keep everything neat. Since then, …