Rahmen falsch - Wenige CM daneben

Andreas.H · June 28, 2022, 1:35pm

When I place a shape with Lightburn, I display the border.
If he lasers then totally wrong?
Set up and calibrated camera.
What am I doing wrong.

I have the Atom A10Pro

Wenn ich eine Form platziere mit Lightburn, lasse ich den Rahmen anzeigen.
Wenn er lasert dann total daneben?
Habe Kamera eingerichtet und Kalibriert.
Was mache ich falsch.

Habe den Atom A10Pro

JohnJohn · July 3, 2022, 6:39am

The first question I have is which coordinate system are you using?
When connected to your Atomstack A10 Pro in LightBurn please open the window and type the following:
$i
$#
$G
and copy / paste the text from the console window into a reply here.

A work offset can create the condition where the framing does not match the location of the commanded work.

This may be of interest:

github.com

gnea/grbl/blob/master/doc/markdown/commands.md

# Grbl v1.1 Commands

In general, Grbl assumes all characters and streaming data sent to it is g-code and will parse and try to execute it as soon as it can. However, Grbl also has two separate system command types that are outside of the normal g-code streaming. One system command type is streamed to Grbl like g-code, but starts with a `$` character to tell Grbl it's not g-code. The other is composed of a special set of characters that will immediately command Grbl to do a task in real-time. It's not part of the g-code stream. Grbl's system commands do things like control machine state, report saved parameters or what Grbl is doing, save or print machine settings, run a homing cycle, or make the machine move faster or slower than programmed. This document describes these "internal" system Grbl commands, what they do, how they work, and how to use them.

## Getting Started

First, connect to Grbl using the serial terminal of your choice.

Set the baud rate  to **115200** as 8-N-1 (8-bits, no parity, and 1-stop bit.)

Once connected
 you should get the Grbl-prompt, which looks like this:

```
Grbl 1.1e ['$' for help]
```

Type $ and press enter to have Grbl print a help message. You should not see any local echo of the $ and enter. Grbl should respond with:

```

This file has been truncated. show original

Andreas.H · July 3, 2022, 12:02pm

Hallo vielen Dank für deine Tipps. Ich habe den Fehler gefunden das war die Kamera!
Ich habe eine andere angeschlossen und funktioniert 100 mal besser musst du nur noch bei Kamerasteuerung den Versatz bisschen nachstellen und schon lasert er da wo ich möchte

Hello, thank you for your tips. I found the fault it was the camera!
I have connected another one and it works 100 times better, you only have to adjust the offset a bit when controlling the camera and it lasers where I want it

Andreas.H · July 3, 2022, 8:04pm

Ok sende dir das morgen zu.
Etwas besser mit neuer Kamera aber noch nicht 100%

Ok will send you this tomorrow.
A little better with new camera but not 100% yet

I have merged the threads where duplicate posts were made and deleted the duplicates. Please refrain from duplicating posts as it increases workload and confusion.

Andreas.H · July 3, 2022, 8:18pm

$G

[GC:G1 G54 G17 G21 G90 G94 M5 M9 T0 F2000 S0]

ok

$#

[G54:0.000,0.000,0.000]

[G55:0.000,0.000,0.000]

[G56:0.000,0.000,0.000]

[G57:0.000,0.000,0.000]

[G58:0.000,0.000,0.000]

[G59:0.000,0.000,0.000]

[G28:0.000,0.000,0.000]

[G30:0.000,0.000,0.000]

[G92:0.000,0.000,0.000]

[TLO:0.000]

[PRB:0.000,0.000,0.000:0]

ok

JohnJohn · July 12, 2022, 6:46pm

I see no work offset.
Does the described problem persist?

Andreas.H · July 12, 2022, 7:11pm

Ja 100% stimmt es nicht überein

Yes 100% it doesn’t match

JohnJohn · July 12, 2022, 9:38pm

I will need more description of what is wrong in order to be helpful.

This may be worth review:

Andreas.H · July 13, 2022, 7:50am

I’ll take a look at the video Thank you and then I’ll try to describe the problem in more detail. My problem is that English

system · August 12, 2022, 7:50am

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.