Rotary Won't Trun

[JTR (Tyler Raps)]

Do you know what firmware version your controller is running? You can check by going to ‘Edit’ > ‘Get Controller Info’ in Lightburn. You may need to change your controller’s firmware version to V26.01.16 for Y axis rotary use.

SOLUTION - U axis direct for Rotary with RDC6445S Controller

If you have the RDC6445S controller (NOT G) then this might just be your lucky day. Here is my link to the Firmware for this controller https://drive.google.com/drive/folders/1_LAxx9-GAc2S9mKJp4kja74dVDvk7eTV?usp=sharing There are 2 Firmware versions - V26.01.13 and V26.01.16 .13 will run your rotary off the U Axis. .16 will run your rotary off the Y Axis. Firmware has to be upgraded through RDWorks I have added a 3rd Axis driver to my machine and all rotary settings are set up on that U …