No official response yet - would appreciate some feedback from the dev’s. Thanks [image] Snapmaker 2.0 A350 Rotary Attachment re-visited Snapmaker LB_Rotary_test_line_360.txt (1001 Bytes) LUBAN_Rotary_test_line_360.txt (1.3 KB) After a significant hiatus, I noted some …

Please test the following: In the Console window in LightBurn, turn on the switch marked ‘Show All’ Repeat the steps with the “Test” button. Select and Copy the text from the Console window and paste it into a reply here. The cause of the Y move should be legible. The word ‘ok’ or something sim…

Hi @ all, here the GCode, the rotary settings and a small movie how the Snapmaker moved. M114 X:41.00 Y:159.21 Z:292.40 E:0.00 B:0.00 Count X:9600 Y:27074 Z:127600 B:0 ok Stream wird gestartet G00 G17 G40 G21 G54 G91 M05 G0 B0 Y0 F6000 G1 B41.67F1800 G1 Y172.788F3750.27 G1 B-41.67F1800 …

@Darkangle This is perfect, and the Snapmaker appears to be following the code as generated. I’ll ask @adammhaile Adam first and see if he still has one and if he’s still on this part of the code.

I can confirm the problem and I believe I know the fix. If this doesn’t make it into the v1.4.04 patch release it should be fixed in v1.5.0

Sounds great! Do you already know an approximate release date? Easter 2024? or something like that :innocent:

[image] Darkangle: Easter 2024? or something like that :innocent: Because of the ephemeral nature of software, we can’t really say “when” exactly but I’ll keep my eye on it. Well, we “could” say… but the odds are far too high that we’d be wrong - so we don’t. :slight_smile:

What @JohnJohn said… however… We are targeting to release v1.5.00 before the end of the year. But again… even for us, that’s a guess. But v1.4.04 is to be released this week so I really don’t think it will make it into that. I’ll post betas here when I have a fix.

@Darkangle The further I dig into this the more I’m unsure I was correct that I see the problem. A few things I’d like you to clarify: Is it only when clicking the “Test” button that it does not work? Is it fine if you actually run the job? Can you explain exactly what you are expecting vs what y…

Sorry it took so long, but I was traveling for work. Here is the console output from the rotary setup test button. M114 X:167.00 Y:204.77 Z:292.40 E:0.00 B:0.00 Count X:29760 Y:34362 Z:127600 B:0 ok Stream wird gestartet G00 G17 G40 G21 G54 G91 M05 G0 B0 Y0 F6000 G1 B56.588F1800 G1 Y127.2…

[image] Darkangle: header_type @adammhaile

LightBurn Software Forum

Snapmaker Rotary Axis - Any comments from the LB developers?

LightBurn Hardware Compatibility Snapmaker