Snapmaker

Topic	Replies	Views	Activity
Snapmaker Ray 20W & 40W Laser with LightBurn (How to... and why...) grbl , not-marlin The sales volumes (and support volumes) seem to be increasing for the new Snapmaker Ray 20W and 40W laser engravers. The dev team has been testing a pre-production unit and everything seems to be going well. The Snapma…	2	3355	November 14, 2023
About the Snapmaker category	0	938	February 16, 2021
Half Diode mode for the 40W laser	18	158	October 30, 2025
What profile for the Artisan + 40W laser	0	27	October 28, 2025
Snapmaker A350 40w and Lightburn setup windows	1	88	October 2, 2025
MillMage For Snapmaker; Anyone Interested? MillMage	5	177	August 3, 2025
LB "Start" Button not working with Snapmaker Marlin marlin	8	145	July 28, 2025
Snapmaker - Port failed to open-already in use? update , snapmaker , windows11 , windows	4	120	July 21, 2025
Cannot read position, impacting Center Finder	4	207	July 13, 2025
M106/M107 G-codes for Laser Inline Control and air assist setting linux , marlin , windows	11	197	July 9, 2025
Red Glazed Tile 2W	16	220	July 5, 2025
Snapmaker Rotary Output Wrong in V 1.7.08 rotary	1	56	May 14, 2025
Snapmaker not using the whole bed / Lightburn not working for the whole bed	12	883	April 28, 2025
Snapmaker 'run boundary' runs in wrong possition, burns in right position! snapmaker	7	1507	March 31, 2025
Framing does not include Laser Offset	22	578	March 27, 2025
Snapmaker 2.0 rotary -frame works but start does nothing rotary , snapmaker	19	267	March 17, 2025
Snapmaker 2.0 40w Air Assist	44	2815	March 17, 2025
Snapmaker Artisan not working properly with Lightburn grbl , homing , firmware , artisan	27	689	March 3, 2025
Settings for Snapmaker 2.0 A350? snapmaker	6	2969	February 23, 2025
SM 2.0 A350 10W No Fire OR partial operability grbl , snapmaker	1	118	December 6, 2024
Announcement: Snapmaker firmware updates have affected LightBurn usage snapmaker	8	1425	December 6, 2024
Problem Engraving and Cutting	0	84	November 23, 2024
Laser still not working with snapmaker	37	2164	October 2, 2024
Magic Ornaments	0	76	September 29, 2024
Job stalling at "starting stream"	5	339	September 29, 2024
Snapmaker 2 A350 10W Job Speed Issue firmware	13	290	September 10, 2024
Snapmaker ray 40w LightBurn Error limits , homing	2	184	September 8, 2024
Thumbnail in gcode for snapmaker	15	447	August 11, 2024
How/Where do I get a response for help with Snapmaker Ray's new firmware catastrophically breaking things in Lightburn? grbl , request , rotary , firmware , snapmaker-ray	11	308	July 29, 2024
Neje Master 20 Laserleitung nicht regelbar grbl	4	76	July 23, 2024

Snapmaker Ray 20W & 40W Laser with LightBurn (How to... and why...)

grbl , not-marlin

The sales volumes (and support volumes) seem to be increasing for the new Snapmaker Ray 20W and 40W laser engravers. The dev team has been testing a pre-production unit and everything seems to be going well. The Snapma…