Unwanted lines while laser cutting

[HakunaMatata (Hakuna)]

Hi! I just bought a laser cutter and installed a program for cutting called LightBurn. (Because the program coming with the laser cutter (Laser Engraver) wasnt enough for me).

Then, i draw a horse for Tangram Game (its a game about shapes). Its all okey for now but when i tried to print that horse with laser cutter, it draws unwanted lines likes in the image (orange lines).

I took that screen shot in LightBurn Program but i dont know how to avoid that line.

Please help me!

And if you have a better program suggestion for laser cutter i would happy to hear that.

Have a nice day…

[Rick (Technical Evangelist)]

Laser not turning off between cuts? (burning during travel moves)

If you have a GRBL device, and your laser is still on when moving between shapes, like this: [image] It most likely means you are using GRBL 1.1f or later, but do not have the controller in Laser Mode. Fix this by typing $32=1 in the Console window and pressing enter If you have a Ruida or other DSP controller and are seeing this happen, it is most likely a dying high-voltage power supply unit (PSU). The drive circuit that turns the laser power off and on tends to go first, before the part …

[HakunaMatata (Hakuna)]

Yeah! GRBL 1.1f is the exact version that i use.
I typed $32=1 in the console and it suddenly solved.
I don’t know what to say. I feel like i owe you a favor . It really helped me a lot.
Thank you…